Single connector lead with molded end

images single connector lead with molded end

The terms are generally used for cables using a power plug to connect to a single-phase alternating current power source at the local line voltage— generally to volts, depending on the location. September Learn how and when to remove this template message. This packaging technique permits the pre-testing of individual modules as they are being manufactured and the ability to replace modules or perform routine maintenance in the field, when necessary. Cords also have different types of exterior jackets available to accommodate environmental variables such as moisture, temperature, oils, sunlight, flexibility, and heavy wear. The primary differences to the C Series are: The smooth one is hot and the ribbed one is neutral. Please help improve this article by adding citations to reliable sources.

  • High Voltage Connectors and Cable Assemblies Single Pin

  • Molded strain relief - All USB cables have plastic overmolding at the connector to Most USB cables will have one end terminating in a USB-A male connector, and .

    These smaller clips can be found on logic analyzers as well as test leads.

    A power cord, line cord, or mains cable is an electrical cable that temporarily connects an appliance to the mains electricity supply via a wall socket or extension cord. The terms are generally used for cables using a power plug to connect to a single-phase alternating current power source One end of the cord set is attached to a molded electrical plug; the other is. Figure 1: Various overmolded cable assemblies custom manufactured for each for the mold is fed into the heated barrel of the molding machine at the hopper end.

    A mold can be designed to be a single or multiple cavities. Lead Acid vs .
    Typical application areas with stricter safety requirements include medical technologystage and lighting technology, and computing equipment. September Learn how and when to remove this template message. Plastic bodies are used in the plug design to captivate the coupling nut and prevent tearing of silicone insulators from over-torquing during mating.

    The connectors have slightly different shapes to ensure that it is not possible to substitute a cable with a lower temperature or current rating, but that it is possible to use an overrated cable. Views Read Edit View history.

    images single connector lead with molded end
    Single connector lead with molded end
    Some devices have a slide-switch to adapt to different voltages, or wide-ranging power supplies.

    A power cordline cordor mains cable is an electrical cable that temporarily connects an appliance to the mains electricity supply via a wall socket or extension cord.

    A cord set may include accessories such as fuses for overcurrent protection, a pilot lamp to indicate voltage is present, or a leakage current detector. Unwary substitution of a standard mains-voltage connector for the power supply would result in application of full line voltage to the connected device, resulting in its destruction and possible fire or personal injury.

    This series is ideally suited for use as a high power, TWT collector interconnect or in E-beam inspection equipment where a low partial discharge design and hermetic feedthrough are required.

    Power cables may be either fixed or detachable from the appliance. Power cables Consumer electronics Electrical wiring.

    our 70 years of high voltage leadership we have served a diverse range of customers in the through to final delivery.

    Utilizing. Connector bodies are molded in flame-retardant polypropylene, color white. • Voltage B-SERIES The B-Series is a compact single pole high voltage connector system capable of operating as. Prefabricated, molded primary leads, with the desired cable length The types above can be made to a specific length, with plug on one end and receptacle on.

    51 Products DC connector plug to plug leads • mm DC connector • Moulded plug & strain PRO POWER - mm DC Plug to Bare Ends Power Lead m polarity trace on one side • Extend the length of your power supply output cable.
    Views Read Edit View history. The terms are generally used for cables using a power plug to connect to a single-phase alternating current power source at the local line voltage— generally to volts, depending on the location.

    Unwary substitution of a standard mains-voltage connector for the power supply would result in application of full line voltage to the connected device, resulting in its destruction and possible fire or personal injury. IEC power cables come in normal and high-temperature variants, as well as various rated currents.

    images single connector lead with molded end

    Products sold in many different markets can use a standardized IEC connector and then use a detachable power cord to match the local electrical outlets. The plug end is molded onto a desired length of silicone cable and can be ordered as single-ended, double-ended cable assemblies with or without shielding.

    images single connector lead with molded end
    Single connector lead with molded end
    Some devices have a slide-switch to adapt to different voltages, or wide-ranging power supplies.

    Video: Single connector lead with molded end How to wire a XLR plug for microphone lead

    Cord sets are detachable from both the power supply and the electrical equipment, and consist of a flexible cord with electrical connectors at either end, one male, and one female. The insulator covering one of the conductors is ribbed parallel to wire for the entire length of the cord, while the other conductor's insulator is smooth. Unsourced material may be challenged and removed. For specialty equipment such as construction machinery, sound and lighting equipment, emergency medical defibrillators and electrical power tools, used in locations without a convenient power source, extension cords are used to carry the electric current up to hundreds of feet away from an outlet.

    Not to be confused with Power chord.

    (USD), Quantity, RoHS, Type, Connector End A, Connector End A Pin Count Amphenol Commercial Products, D-Sub Cables CABLE DB37 M/F MOLDED moulded connectors with pre-connected cables. Both may choose to use another connector on the open end or The failure of a single connector could lead.

    Commercial Single Line Connectors. molded-end lead assemblies properly . Note: Receptacle will accept a LGH 1⁄2 lead with a [] molded end.
    The smooth one is hot and the ribbed one is neutral.

    images single connector lead with molded end

    Cord sets are detachable from both the power supply and the electrical equipment, and consist of a flexible cord with electrical connectors at either end, one male, and one female. By using this site, you agree to the Terms of Use and Privacy Policy. Cords may also have twist-locking features, or other attachments to prevent accidental disconnection at one or both ends.

    Video: Single connector lead with molded end How To Make RJ45 Network Patch Cables - Cat 5E and Cat 6

    In addition to the SID Series' unique interface sealing system allowing the mated connectors to perform well under vibration, shock, altitude and temperature extremes, it also provides excellent corona partial discharge characteristics in pulsed DC and AC applications.

    images single connector lead with molded end
    Single connector lead with molded end
    It looks like your browser does not have JavaScript enabled.

    The female connector attaches to the piece of equipment or appliance while the male plug connects to the electrical receptacle or outlet.

    High Voltage Connectors and Cable Assemblies Single Pin

    Views Read Edit View history. From Wikipedia, the free encyclopedia. Retrieved from " https: Webarchive template wayback links Articles needing additional references from September All articles needing additional references.

    A cord set may include accessories such as fuses for overcurrent protection, a pilot lamp to indicate voltage is present, or a leakage current detector.

    5 Comments

    1. In addition to the SID Series' unique interface sealing system allowing the mated connectors to perform well under vibration, shock, altitude and temperature extremes, it also provides excellent corona partial discharge characteristics in pulsed DC and AC applications. Cord sets are detachable from both the power supply and the electrical equipment, and consist of a flexible cord with electrical connectors at either end, one male, and one female.

    2. Webarchive template wayback links Articles needing additional references from September All articles needing additional references. Typical application areas with stricter safety requirements include medical technologystage and lighting technology, and computing equipment.

    3. Maxxum Series connectors are robust in their construction, using stainless steel for the threaded coupling nut and body while also incorporating Teledyne Reynolds' patented Advanced Interface Sealing System TM for unmatched electrical performance at reduced atmospheric pressure.

    4. By using this site, you agree to the Terms of Use and Privacy Policy.

    5. The terms power cablemains leadflex or kettle lead are also used.